This week as the American Society of Clinical Oncology’s annual meeting in Chicago, and I spent five days just north of the river, at the Marriott on S. Ontario Street. When I arrived, I was quite excited to see that my 23rd floor window opened ever so slightly, meaning I could get an antenna out. For the next several days, though, I was busy around the clock, and only on the final day did I get a chance to try to operate from the hotel. As seems to be a trend with these hotel operations, it failed miserably.
The rig was the TenTec 1320, so I was looking at day time operation, but I had a slight problem – the side of the hotel was white and my antenna wire was black. I wasn’t so much worried about someone noticing my antenna from the street level, after all, 30 feet of black wire up about 200+ feet is pretty difficult to see, but I was worried about neighbors hearing something tapping at their window and then seeing the black, insulated wire dangling. One good pull, and various pieces of my station would be headed towards the pavement.
There is a Radio Shack on Michigan, just south of the river, and as Ben informed me, they are unusually competent. I walked in, asked for antenna wire, and they knew where it was!
When I got back to the room, I figured that since I was so high up, I might as well put up as long a wire as possible. I doubled the 31.5′ length recommended by the SLT+ tuner manual to make a full wave longwire. It would have been nice to have had a tape measure, but I was able to work it out in multiples of 8.5 and 11 inches, which was doable with what I had on hand. I weighted the far end down with a ring from a keychain. I ran the counterpoise wire along the floor of the hotel room, and yes, tripped over it several times.
I looked around for something to protect and insulate the wire as it passed through the window sash, and decided that one of the throw-away ASCO newspapers could be rolled into a tube, and would help get the wire a little bit away from the building.
Not far enough, though. Although I had two of the elements of the magical formula for antennas (lots of wire, high up), I think the wire’s proximity to the building killed it. I was able to tune the antenna to fully extinguish the LED on the SLT+ tuner, indicating a good match, but being near the metal structure of the building effectively shielded the antenna. I heard few cw conversations on 20m in the morning. Granted, it was a weekday, but even so, the signals were not loud. I tried calling CQ for a while, but no responses. Now that I’m back in Virginia, I’ll need to double check the radio to make sure it is transmitting correctly, but I’m pretty sure it was the antenna and not the radio.
I got back late Tuesday night, and had two large boxes waiting for me when I walked in — the equipment that I had shipped out to Operation Sizzling Pork. Tymme had shipped it two days before. Score one for UPS Ground service (and Tymme’s professional-grade packing skillz).
Not really related to any of this travel, but still along the lines of amateur radio, on the way to work yesterday, I noticed that Bob Heil had produced three episodes of the “Ham Nation” podcast. I had enjoyed his interview with Leo Laporte on Triangulation a couple months ago, and I had heard in subsequent weeks that they would be working on a ham radio-specific show for the Twit network.
As much as I appreciate the effort, I can’t say that the first few shows have, pardon the expression, resonated with me. The show may need some time to find itself, but I think it needs more structure. I wonder if it wouldn’t work better to have two hosts, one of whom is not an expert and could ask the questions that might be occurring to the audience. The show also needs to figure out what audience it wants to address. The other shows on Twit presume a sophisticated audience with knowledge of the field (e.g., Security Now), but there is something of a proselytizing aspect to Ham Nation. There is a huge audience of people worldwide who are already hams, and these are the people who most likely have sought out the show (and, from a commercial aspect down the road, probably the best target audience for ham-related ads).