Field Day 2014

jack_cw_tentThis may be my last region two field day for a while, as plans are rapidly coming together for the move to Madagascar in August. I’m not writing off the possibility of field day next year as I know that I’ll be stateside in June for the American Society of Clinical Oncology meeting in early June, and there are some other meetings during the month that could reasonably keep me here. Also, I might throw in a bit of leave time since I’ll probably be wiped out after field day and want a day or two to cool off before heading back to Antananarivo.  In any event, this was a good chance to shake down some of the equipment that I will be bringing with me, particularly the hexbeam antenna from K4KIO.

As usual, field day planning started far in advance of the event. This year’s field day czar, Regis KF4PIY introduced a few innovations into this year’s FD, the most visible of which was tighter clustering of the stations. In the past, we spread over a large field near the entrance to Burke Lake Park, with some of the stations “down the hill” and some up. Having been “down the hill”, I can attest to the perception that it is better to be “up the hill” both from an antenna perspective and in terms of being nearer to the food and bulk of the social gathering. The obvious concern was that tighter clustering would lead to more interference. However, after a few antenna pow-wows, the band captains were happy the proposed layout and our RF gurus were reasonably confident that it would all work.

Equipment stacked up and awaiting transport.
Equipment stacked up and awaiting transport.

As for the last three years, I was band captain for the non-40m CW station. Most of the equipment that went to field day had gone the previous year. The main rig was the Elecraft K3 with 200 and 450 Hz filters, my main CW rig at home. I brought along the microphone just in case, and that turned out to have been fortuitous, as we had plenty of opportunity to jump on bands that other stations were not working, scoring the only voice contacts for six and ten meters. I gathered the equipment over the course of a few days and queued it up in the front hall. The day before field day, it all got loaded into the car and carted out to Burke Lake Park. I had considered staying out at the park that night and did pitch a tent, but so many others overnighted at the park that I decided a good night’s rest in my own bed would be the smarter decision.

Essentially all of the antennas were pitched on the afternoon before field day including the hex beam. Leon NT8B had purchased an AB577 mast system at one of the winter hamfests in the area and we decided to combine it and the hex beam. Despite being the first deployment of both pieces of equipment, it went smoothly. The AB577 is an intimidating piece of gear; it is repurposed military gear and looks it. It is painted some official shade of matte olive drab and the five foot sections come in a rack that looks like a portable rocket launcher.

Jacob KK4WJA cranks up the AB577
Jacob KK4WJA cranks up the AB577

The rack itself becomes the bottom portion of the antenna and sections are fed into it and cranked up into position, with a joining clamp added between each section. The diameter of these sections is about five or six inches, but the sections themselves are much lighter than they appear; they can be easily lifted by one person. An adapter piece goes on the top, and its outer diameter is about two and quarter inches.

We decided to set up the mast at 45 feet, which required three layers of guying, with guys in three directions at each level. Cables, stakes, and clamps to tighten the lines are all part of the AB577 kit. The lines are all attached at the start, but do not play a significant role until the mast is up fifteen or twenty feet.

When we got the first couple sections of the mast in place, it was time to add the antenna. The hexbeam comes in an unexpectedly small box, about five feet long corresponding to the length of the longest spreader section. Each spreader consists of three telescoping fiberglass segments. Loops to retain the wire elements are already in place on these segments.

In addition to the long box that contains the spreaders and central support column, a smaller box also showed up at my door. This box contained the base plate which anchors all of the spreaders and the central column and when installed sits on top of the supporting mast. I had ordered elements for all possible bands, so 6, 10, 12, 15, 17, and 20 meters. The wires for these bands were also in the box, as were support strings, ferrite rings, heat shrink and instructions. The ferrite rings must be ordered according to the intended feed line, in my case RG213. The rings go over the coax near the feed point and are held in place with the shrink wrap. These ferrites function as a choke and keep RF off the feed line.  Since 12 and 17 meters are not included in field day, I left them out of the set up this time.

hexbeam1
Items in the accessory box: wire elements, strings, and the central hub.

Spreader segments and the central column.
Spreader segments and the central column.

Many hands made quick work of putting the hex beam together. Once we had read the instructions, it took less than fifteen minutes from crate to full assembly. It really is a dead simple antenna to put together because all of the attachment points are already set and the wires are cut to exactly the right length. For someone who never had a store-bought antenna before, this seemed almost like cheating, but I reminded myself that the next time I’d be doing this, I would be far away from the club and likely wouldn’t have as many helping hands.

Bob connects a support string to the central hub while Thor stabilizes the antenna.
Bob connects a support string to the central hub while Thor stabilizes the antenna.

John holds the antenna during rigging of the band-specific wires.
John holds the antenna during rigging of the band-specific wires.

We did run into one snag: the outer diameter of the support mast was about an inch wider than the than the flange on the antenna base plate. The sun was already low on the horizon at this point, but we were eager to find a solution that evening. I made a quick trip to Home Depot and picked up a two foot piece of one-inch black pipe, which is actually about 1 and quarter inches outer diameter. I also grabbed a bunch of U-clamps. Putting the whole thing together additionally involved a bunch of duct tape and two tent stakes that were hammered into shape as adapters.

Members working on finding a mounting solution for the hex beam.
Members working on finding a mounting solution for the hex beam.

By the time the sun set, we were convinced that our adapter was rigid. We set the hex beam down on the grass for the evening rather than attempt to attach it to the mast and raise it in suboptimal lighting.

The next morning, we were able to hand the antenna up to members on a ladder. They tightened the hex bolts on the hex beam’s flange, and the antenna stayed level. Additional sections of the AB577 were then added, and the antenna climbed skyward in five foot increments. Around twenty feet up, the guy lines began to have more and more importance. We had minders on each of the guy lines as well as spotters to assure that the tower was staying vertical in all planes. When the antenna was finally in position, the clamps on the end of each guy line were tightened.

ant_in_place

Finally, the antenna reached 45 feet up, plus a bit for the extension.  A quick check at 5W verified that the antenna was working, with responses up and down the east coast.   An 80m dipole (the same one used in the Indiana QSO Party last year) was also erected to cover that band.

After the antennas were in place, the rest of the station was set up, based on the Elecraft K3 transceiver, N1MM running on a laptop, and trusty Bencher paddles.

the_setup

The station remained in continuous operation from the start until the end of Field Day 2014, concentrating on 20m during the day and 80m in the evening and early morning. However, since we did not have a dedicated VHF station this year, on the morning of day two, we quickly ran the band on both voice and CW, chalking up about 10 local contacts. We also ran 10  meters when it was open. We started on voice and had a good run, but conditions were fading by the time we got to CW, so ironically, we made more contacts on voice than CW. We also had a chance to work on 15 meters for a while on day one, when the other CW station was doing good business on 40m. Although 15m and 40m are harmonically related, simultaneous operation did not result in interference.

Band mode qsos
3.5 cw 278
3.5 ssb 240
7 cw 718
7 ssb 676
14 cw 542
14 ssb 467
21 cw 151
21 ssb 19
28 cw 19
28 ssb 50
50 cw 3
50 ssb 7

 

A major difference from last year is that all four stations remained on the air around the clock; this is strongly reflected in our score for this year, which broke 10,000.

John K3US concentrates on code in the wee hours of the morning.
John K3US concentrates on code in the wee hours of the morning.

Leave a Reply

Your email address will not be published. Required fields are marked *