Having recently put up the G5RV, I gave the ARRL DX CW contest a shot this past weekend. The antenna is up only about 10m and is not resonant on 15m, but it has performed well on 10 and 20m in the past. On the first night, 10m was very quiet, but activity on 20m was brisk, particularly in the early morning hours when I was working two calls per minute.
In principle, 10m should have been open starting the in mid-afternoon on Sunday, but it was slow until around dinner time. Again, 20m was my main band, despite having mostly mined it out the previous day. I managed to get a few contacts on 15m, and even fewer on 40m, where local noise was a problem.
I didn’t stay in the chair the full time, even when I had favorable North American windows. I had to disconnect the antenna for some time due to thunderstorms on Saturday afternoon and on Sunday evening I had a guest in town and went out for dinner. Still, I am happy with the number of contacts I made given my conditions.
I worked a few states that I hadn’t such as Vermont, Rhode Island, Delaware, West Virginia, Nevada and Wyoming — hopefully, those stations will QSL via LOTW. I heard a North Dakota station, but barely, and he was drowning in a pile up. Maybe I’ll take another shot when Sweepstakes or some other convenient contest rolls around and I have the hexbeam up.
Living in Madagascar, I have enjoyed operating from a sought after DXCC entity; little did I suspect the same would be true on my recent trip to Europe. I packed along the FT817 on a trip to Nice, France, where I attended a business meeting. I had picked a hotel with an open 8th floor deck and hoped to string up the end-fed to operate in the evening. On the way out the door, my wife asked me, “so I don’t suppose you’ll have any time to visit Monaco, while you’re there?” I have to admit that I hadn’t really thought about it, but as soon as she mentioned it, the gears began turning. I had meetings in Nice and Lyon, but some free time on Saturday before flying out. On the way to the airport, I double checked that Monaco was a signatory to the CEPT convention.
I envision having a few antennas: the hexbeam, the G5RV, lindenblads for 70cm and 2 satellite work, perhaps a vertical of some sort if I can figure out where to place it, and maybe some kind of beam antenna for six meters. To make all that work, I’ll need some sort of way to bring the lines in the shack and to switch among them. I brought four alpha-delta four position switches, which should be enough to both perform this function and switch the lines to the available rigs. With that intention, I laid the switches on the bench and drew out the wiring diagram.
However, I never got there; not yet, at least. After piling up some connectors and coax and wood, I realized that what I really needed in the garage in order to do this sort of work was some kind of background noise to keep me entertained. So, I pushed the very useful antenna switching project to the side and turned back to the computer that I had fried a few weeks ago by plugging it into the 230V while its power supply was set to 110V.
The antenna situation has improved. There is progress on the hex beam, but in the meantime I’ve put up a G5RV. It is almost exactly the size of the largest run possible on my property. I had some difficulty getting enough angle on the trees to shoot the line and I am frankly surprised it all worked. The line is tied down to the tree trunk on one end, and the other loops over a tree, then through a metal loop screwed into the property wall, and that end suspends a brick, which maintains tension on the line but has enough give to allow tree motion. The center twin lead is centered over my house and I was not able to get the two arms of the antenna high enough to allow the feed line to hang down straight; this is not ideal as it will change the plane of radiation since the feed line is active in this design. I was also concerned about the feed line coming down too close to the metal roof, so I have arranged another support for the feed line, which pulls it close to horizontal. It also keeps it away from the high power security lights that rim the roof and which put out some RF.
I swept the antenna with an MFJ analyzer in the shack and the SWR is less than 3:1 on 80, 40, 20, 17 and 10m. I have had some good runs on 10, 17, and 20 meters, and a few contacts on 40m. Even on bands where it it not resonant, I’ve had reasonable success using a tuner; being able to run 100W gives me some margin for inefficiency. I worked one EU station after another one afternoon on 30m, and finally had a contact with Alain, 5R8AL, also in Madagascar on 12m. The additional power has allowed me to run a frequency on voice.I’ve now set up the TS450 for digital communications and have had a few PSK31 contacts as well. I’ve getting some RF back, which is affecting the external USB sound card, so a near term project will be fixing station grounding.
As for the hex beam, I finally have all materials. I visited a local lumber yard and had a 4m x 15cm x 15cm post milled. It arrived at my house on a cart and is now sitting across two chairs on my porch. I’ve given the post a coat of wood treatment (permethrin + cobalt salts) and will paint it for more protection. Meanwhile, an almost 2m deep hole has been dug in the backyard, and I’ve purchased about 200 kg of cement, which with some aggregate will become the base for the wooden support beam.
The plan is to get the base in place and set up a shelf using angle iron to support the G450 rotor. Further up the post, I will install a universal thrust bearing to handle the lateral load. A 10m spiderbeam telescoping mast will support the hex beam, and will itself be guyed at two levels. Finishing this project will await some good weather and enough time to see it through.
Voici ma première critique d’une IF française en français (ou, j’espère en une langue qui se ressemble un peu au français)…
Comédie par “Edgar Havre” est composée des scènes liées par les courtes conversations. Grace au module “Simple Chat” par Mark Tilford, les conversations se déroule comme une série de choix. Pour commencer une conversation il faut “parler à qqn”. Les conversations se modifie un peu en fonction des événements observés. En cette manière, les conversations sont limitées, mais elles servent pour introduire les puzzles.